Water Filtration in Fort Worth, TX
Catalytic media rated for chloramine, not just chlorine. This page covers it for homes in Fort Worth, on the supply the city actually runs.
What filtration has to handle in Fort Worth.
The media has to match the disinfectant, and here that is chloramine. Ordinary carbon barely touches it at household flow rates, which is the usual reason people fit a filter and decide filtration does not work. Catalytic carbon is the specification that does the job, and the bed has to be sized to your peak flow so the water is in contact with it long enough.
One thing specific to this city, the city puts total hardness at 100 to 171 mg/L, about 6 to 10 grains, which straddles the line where softening starts to pay. At the bottom of that range a softener is hard to justify.
What whole house filtration answers in Fort Worth.
These are the parts of the local supply this system is actually for.
Chloramine
A stable disinfectant held at a 2.0 mg/L minimum residual. Ordinary carbon doesn’t remove it properly.
Learn More →PFAS context
The city pursued a major PFAS action, which makes treating the drinking tap a reasonable thing to ask for.
Learn More →Iron and manganese
Both are reported in the supply, and both show up as a metallic taste or staining on fixtures.
Learn More →A filter is only as good as its media.
The difference between a filter that works in DFW and one that does not is the media choice and the contact time. Both are sizing decisions, not brand decisions.
Showers stop smelling
Disinfectant is removed before it reaches the hot water, which is where you notice it most.
The tap becomes drinkable
Taste and odor go, and the fridge stops being a filter-jug depot.
Holds through the switch
Catalytic media keeps working when the supply changes to free chlorine for the annual maintenance month.
Kinder to fabrics and skin
Less residual disinfectant in bathing and laundry water.
One visit, water back the same afternoon.
Tell us what you have noticed
Call or send the form. Spots, scale, taste, smell, or a system that stopped working.
Get your quote
One price for the system your home needs. Free, and no obligation to book anything.
We install it
Usually a single visit, and we are the ones who come back to service it.
Start with the reading.
We measure hardness, chlorine and dissolved solids at your tap and size from what comes back. It takes about twenty minutes and the numbers are yours to keep.
- Free quotes, with no obligation to buy
- One price for the whole job
- Systems sized to your home
- We service what we install
- Lifetime warranty on the tanks
- The owner picks up the phone himself
Get a quote
The visit and the quote are on us.
Asked locally.
Do I need whole house filtration in Fort Worth?
The media has to match the disinfectant, and here that is chloramine. Ordinary carbon barely touches it at household flow rates, which is the usual reason people fit a filter and decide filtration does not work. A free test at your tap settles it before anything is sized.
What does the install involve?
A free quote first, then one price for the whole job. Most whole house work is a half day with the water off for two to three hours. An under sink membrane station is usually two hours or less.
Who supplies Fort Worth water?
City of Fort Worth Water. Bridgeport, Cedar Creek, Eagle Mountain, Richland-Chambers, Benbrook and Lake Worth.
Do you service what you install?
Yes, and we service systems we did not install too. Salt and filter intervals go on a schedule so the same fault does not come back next year, and diagnosis always comes before parts.
We’ll tell you if Fort Worth water doesn’t need softening.
A test gives you hardness, chlorine and dissolved solids readings, and an honest recommendation built on them.
Serving Fort Worth and Tarrant County